Air IDEAL®

The Standard of Confidence

air IDEAL® 3P is for the detection of viable organisms through active air sampling. It uses standard prepared media, such as contact plates or 100mm plates.

air IDEAL® 3P is for the detection of viable organisms through active air sampling. It uses standard prepared media, such as contact plates or 100mm plates.

USES

air IDEAL® is used for:

  • Environmental monitoring

FEATURES AND BENEFITS

For active microbiological air sampling, air IDEAL® meets the latest ISO standards while remaining economical to purchase and operate. air IDEAL® has an ergonomic design and is user-friendly, easy to operate and programmable, allowing sequential air sampling.

In an environment of increasingly strict regulation, the air IDEAL® aerobiocollector meets the most stringent parameters. CE, UL and CSA marked, the air IDEAL® operates according to the impaction principle recommended by the draft standard ISO/DIS 14698-1, with air intake of 100 L/min and impact speed of <20 m/sec.

AIR IDEAL® FEATURES

air IDEAL® air samplling instruments and environmental monitoring air IDEAL® microbiological air sampler is designed with greater user comfort in mind:

  • Easy to use:
    • Lightweight (1.3 kg)
    • Ergonomic ambidextrous handle
    • User-friendly software with sampling parameter storage, audible and visual alarm at end of cycle, programmable start-up (1-60 minutes)
    • Sequential sampling
  • Robust: Monoshell of injected ABS plastic
  • Complete: Supplied with five sampling grids:
    • Interchangeable without adjustment
    • 1/4-turn screw-on and screw-off
      • Autoclavable at 134°C for 18 minutes
  • Universal: Two versions available to adapt to diameters of commercialized agar media plates (contact and mono)
  • Easy to maintain: Resistant to disinfectants, with smooth surface and no dead angles

The air IDEAL® air sampler also offers greater control security:

  • Performance:
    • Demonstrated by Technical Center for the Aeraulic and Thermal Industries (CETIAT)
    • Almost all particles between 3 and 10µm collected
  • Precision: Air intake rate metrologically tested by CETIAT
  • Four-hour autonomy:
    • NiMH battery, specially designed to prevent progressive decrease in battery capacity
    • Alarms at end of battery autonomy enable user to finish collecting sample in progress in complete security
    • Residual autonomy display
    • Automatic display switch-off after five minutes of inactivity
  • Guaranteed air-tightness
    • O-ring seals inside device guarantee no contact with mechanical and electronic instrument parts while providing air-tight air circuit
    • Design guarantees continuous new air intake (air taken in is evacuated on side opposite to air intake)

AIR IDEAL® USES

air IDEAL® air quality control and environmental monitoring For Clinicial Laboratories, Clinicians/Administrators, Cosmetics/Personal Care, BioPharma, Food:

  • Environmental monitoring

Pioneering diagnostics